Tap any paragraph to write a margin note. Your notes collect in the Desk below the text and file under cases with @. The side-by-side margin rail opens on a larger screen.

§
Marginalia
Code · CFR · Title 40 — Protection of Environment · Part 63 · § 63.701

§ 63.701. Applicability.

456 words·~2 min read·/us/cfr/t40/s§ 63.701·

A research copy — for the controlling text, always check the official state or federal source. Not legal advice.

(a)Except as specified in paragraph
(b)of this section, the provisions of this subpart apply to:
(1)Each new and existing magnetic tape manufacturing operation located at a major source of hazardous air pollutant
(HAP)emissions; and
(2)A magnetic tape manufacturing operation for which the owner or operator chooses to use the provisions of § 63.703(b) and
(h)to obtain a Federally enforceable limit on its potential to emit HAP. Explanatory Note: A reason the owner or operator would make the choice described in paragraph (a)(2) of this section is if the plant site, without this limit, would be a major source. The owner or operator could use this limit, which would establish the potential to emit from magnetic tape manufacturing operations, in conjunction with the potential to emit from the other HAP emission points at the stationary source, to be an area source. Note, however, that an owner or operator is not required to use the provisions in § 63.703(b) and
(h)to determine the potential to emit HAP from magnetic tape manufacturing operations.
(b)This subpart does not apply to the following:
(1)Research or laboratory facilities; and
(2)Any coating operation that produces a quantity of magnetic tape that is 1 percent or less of total production (in terms of total square footage coated) from that coating operation in any 12-month period.
(c)The affected source subject to this standard is the magnetic tape manufacturing operation, as defined in § 63.702.
(d)An owner or operator of an existing affected source subject to the provisions of this subpart shall comply according to the following schedule:
(1)Within 3 years after the effective date of the standard, if the owner or operator is required to install a new add-on air pollution control device to meet the requirements of § 63.703(c) or (g); or
(2)Within 2 years after the effective date of the standard, if a new add-on air pollution control device is not needed to comply with § 63.703(c) or
(g)of these standards.
(e)The compliance date for an owner or operator of a new affected source subject to the provisions of this subpart is immediately upon startup of the affected source.
(f)The provisions of this subpart apply during periods of startup and shutdown, and whenever magnetic tape manufacturing operations are taking place.
(g)Owners or operators of affected sources subject to the provisions of this subpart shall also comply with the requirements of subpart A as identified in Table 1, according to the applicability of subpart A to such sources.
(h)In any title V permit for an affected source, all research or laboratory facilities that are exempt from the requirements of this subpart shall be clearly identified.
Connections2 cite this
Citation graph
cites case law
§ 63.701
Applicability.
Fed. Reg.×2
Cites 0Cited by 2 across 1 source
★   the supreme law of the land   ★
Don't Tread on Me
E Pluribus Unum — out of many, one

"If you don't know your rights, you don't have any."

Marginalia · a citizen's law index
A research desk, not legal advice. Always read the cited source before relying on a summary.
Questions or an issue? support@self-law.org
disclaimerMarginalia is a research index, not a law firm. Nothing on this site is legal, tax, or financial advice and no attorney–client relationship is formed by using it. Statutes, regulations, and case law change; summaries, search results, AI output, and member posts may be incomplete, out of date, or wrong. Any interpretation drawn from material on this site should be validated by a licensed attorney in your jurisdiction before you act on it.